Metal and shingle roofs in Scottsdale, in short
Metal and shingle roofs in Scottsdale behave nothing like tile, or like each other. Shingle is the cheapest to install and the first to be consumed by ultraviolet light. Metal costs more upfront and fails at its fasteners and details rather than across its surface.
That difference matters more here than in most of the country, because the thing that ages a roof in this climate is sunlight rather than weather. A material’s resistance to ultraviolet exposure and to daily thermal movement decides its life, and the two materials answer that question in opposite ways.
This guide covers how each behaves in Scottsdale conditions, what fails first on each, where one suits a house better than the other, and which decisions are worth making before a roof forces them. Each section links to a detailed article on that one subject.
Scottsdale’s housing stock is mostly older than its tile reputation suggests
Census American Community Survey 2023 five-year estimates put 102,546 of the city’s 138,422 housing units, about 74 percent, as built before 2000. The city’s own homeowner guide records that asphalt and fiberglass shingles were “used on sloped roofs almost exclusively until the 1990’s”, before clay and concrete tile took over.
So the shingle roofs locally are concentrated in the older stock, and many of them have been replaced at least once since (US Census Bureau). Those are survey estimates pooled across several years with margins of error, so read them as a picture of the housing stock rather than a count.
Metal arrived later and sits in a different place: new builds, re-covers over failing shingle, and homes where the owner has chosen it deliberately. That makes metal an active decision in a way tile and shingle on an older house usually are not.
Sunlight is the variable that decides both
At the Scottsdale Municipal Airport weather station, NOAA’s 1991 to 2020 normals average about 93 days a year at or above 100 degrees Fahrenheit and about 161 days at or above 90. The annual rainfall normal is only 8.73 inches, so these roofs spend most of their lives dry and exposed.
That is the opposite of the conditions most roofing guidance assumes (NOAA NCEI). National Weather Service figures for the Phoenix area add an average of 21 days a year at or above 110 degrees over the same period, and 2024 alone produced 70 such days (NWS Phoenix).
Two mechanisms follow. Ultraviolet light breaks down the organic and polymeric parts of a roof from the surface inward, which is what consumes an asphalt shingle. And every component expands through the day and contracts overnight, which is what works metal fasteners loose over years. The City of Scottsdale’s homeowner guide describes exactly that cycle loosening nails over time.
A material that resists one of those is not automatically good at the other, which is the whole reason this comparison is not a ranking.
Asphalt shingle is consumed from the surface down
A shingle is an asphalt-saturated mat with mineral granules bonded to its face. The granules are the sunscreen: they take the ultraviolet hit so the asphalt underneath does not. As they shed, the asphalt is exposed, dries, loses its flexibility, and the shingle begins to curl, crack and lose its seal.
That sequence is predictable, which is useful. It means a shingle roof tells you where it is in its life if you know what to look for, rather than failing without warning.
The two clearest signals are granule loss and curling, and they mean different things. Granule loss on shingles covers what a gutter full of granules is actually telling you and when it stops being normal. Curling shingles covers why edges lift, why the pattern across a roof matters, and what it says about the remaining life.
The hidden half is the same as on a tile roof: the layer underneath. Shingle underlayment covers what sits below the shingles, why the choice between felt and synthetic matters more in this heat than in a mild climate, and why it is the component you cannot inspect from the ground.
Wind is what removes shingles, and it is the dominant local hazard
Heat ages a shingle roof. Wind is what takes pieces off it. The City of Scottsdale’s homeowner guide names wind as the most damaging element in the southwestern desert, and the NOAA Storm Events Database records 659 thunderstorm wind reports in Maricopa County across the ten years from 2016 to 2025.
By comparison the same period holds 98 hail reports and 450 flash flood reports (NOAA NCEI). Those are reports rather than every occurrence, and reporting is denser where more people live, so the figures describe observation as much as weather.
An aged shingle has lost the sealant bond between courses, which is what holds it down in a gust. That is why wind damage tends to arrive all at once on a roof that was already near the end rather than gradually across its life.
Wind damage to shingles covers what to look for after a monsoon storm, which damage is cosmetic and which is an opening, and why the absence of missing shingles does not mean the roof is intact. The National Weather Service office in Phoenix defines the monsoon season as June 15 through September 30 (NWS Phoenix).
Not all shingles are the same product
The two common shingle types perform differently and are frequently quoted interchangeably, which is how two bids for the same roof end up describing different products. Three-tab shingles are a single flat layer. Architectural, also called dimensional or laminated, are built from bonded layers, which makes them heavier, thicker and generally more wind-resistant.
That difference shows up in how long each lasts here and in what a quote actually covers, which is why a price comparison between two shingle roofs can be comparing two different products.
Architectural versus 3-tab shingles covers what separates them, what the weight and layer count actually buy, and the questions that make two shingle quotes comparable.
Metal fails at its details, not its surface
Metal does not have an ultraviolet problem in the way asphalt does, and that single fact inverts everything about how it ages. A coated metal panel will comfortably outlast the fasteners, sealants and flashings around it, so the field of the roof stays sound while the joints and penetrations quietly become the maintenance item.
Thermal movement is the reason. Metal expands and contracts measurably through each day, and over years that movement works at every fixing and every sealed joint. On an exposed-fastener system each screw and washer is a potential entry point. On a standing seam system the panels are designed to move, which is why the two behave differently over time.
This is also why metal is not maintenance-free, despite how it is often sold. The surface finish is a consumable layer like any other coating. Recoating and repainting a metal roof covers when a finish is due, what preparation decides the outcome, and why the job is more about the surface beneath than the paint.
Condensation under a metal roof covers the moisture question, which is real but behaves differently in a dry climate than the general guidance assumes.
Metal over shingles is a real option with real conditions
One of metal’s practical advantages is that it can sometimes be installed over an existing shingle roof rather than requiring a full tear-off first. That saves both disposal cost and time on site, and it is a legitimate approach where the conditions allow it rather than a shortcut.
The conditions are the important part. The City of Scottsdale’s older homeowner guide permits a maximum of one asphalt shingle overlay over one existing shingle roof, and ties the permit trigger to work on the roof sheathing or structural framing. That guide predates the city’s current code, so it should be read as the city’s published guidance rather than a current rule.
Scottsdale adopted the 2021 International Residential Code along with the 2021 IBC and IECC, effective in January 2023 (City of Scottsdale). Confirm the requirement for your specific job with Scottsdale’s permit services before any work starts.
Metal over shingles covers when a re-cover is appropriate, when the existing roof has to come off regardless, and what the decision turns on.
Two metal questions that put people off, answered honestly
Lightning and noise are the two objections that come up before anything technical does, and both are more myth than mechanism, which is why they deserve answering properly rather than waving away. Do metal roofs attract lightning covers what the physics actually says and why the conclusion most people reach is backwards.
Noise is the other. Rain noise on a metal roof covers why a modern metal roof over a decked and insulated assembly sounds nothing like a metal shed, and what in the construction determines it.
Neither question should decide a roof, but both deserve a straight answer rather than being dismissed, because they are the ones people actually ask.
The cost comparison runs over years, not at the quote
Shingle is cheaper to install and metal lasts longer, which is where most comparisons stop and where most of them go wrong. That framing is incomplete because it ignores the only number that matters to an owner: how many times you buy each one over the period you actually keep the house.
What makes the comparison real is the cost per year of service in these specific conditions, plus the maintenance each needs along the way. A shingle roof in Scottsdale sun is working harder than the same roof elsewhere, and a metal roof needs its finish and fixings attended to rather than being left alone for forty years.
Is a metal roof worth it in Scottsdale covers that calculation and the circumstances where each material genuinely wins, including the ones where the answer is neither.
A note on how this guide handles pricing. Specific installation costs for either material are set by roof area, pitch, access and what has to come off first, and we publish no local figure we cannot stand behind. For what a metal installation involves and to discuss a specific roof, see our metal roofing in Scottsdale page.
The two materials compared on what actually differs
Most comparison tables lead with lifespan and price, which are the two things that depend most on the specific roof, the specific installer and the specific year you buy. The properties below hold regardless of the house, which makes them the ones worth comparing before anyone quotes anything.
| | Asphalt shingle | Metal | |—|—|—| | What ages it here | ultraviolet light consuming the asphalt once granules shed | thermal movement working at fasteners and sealed joints | | Where it fails first | the field of the roof, broadly and predictably | the details: fixings, flashings, penetrations | | How failure announces itself | granule loss, then curling, then lifting in wind | a leak at a specific point, with the surrounding roof sound | | What maintenance looks like | essentially none until replacement | periodic attention to fixings, sealant and finish | | Weight on the structure | light | light, and usually lighter than tile | | Re-cover possible | limited, one overlay at most under the city’s older guidance | often, over a sound shingle roof | | Noise and lightning | not raised | raised constantly, mostly myth |
The row that changes decisions is the second one. A shingle roof wears out as a whole, so its replacement is a single large event you can see coming. A metal roof develops point failures while the rest stays serviceable, so it is repaired rather than replaced for much longer, and the owner who ignores a single loose fastener pays for it in a way a shingle owner does not.
The signals that a roof of either type is near the end
On shingle the sequence is reliable. Granule accumulation in gutters comes first, then curling or clawing at the edges, then cracking across the face, then shingles that lift or go missing in a wind event they would once have survived. A roof showing the last two is not a repair candidate in any meaningful sense.
On metal the signals are different and easier to miss, because the panels themselves usually still look sound. Fastener heads backing out, washers that have perished, sealant that has cracked at a flashing or a penetration, and rust starting at a cut edge or a scratch are the things to look for. None of them is dramatic and all of them are entry points.
What the two share is the layer underneath. On both materials the underlayment is the actual waterproofing, and on both it is invisible without lifting the covering. That is why an assessment that reports only on what can be seen from the ground has not answered the question that decides the timing.
Interior signs apply to both equally: a stain that appears only in heavy, wind-driven rain, or stains in more than one place, point at the layer rather than at any single component.
Matching the material to the house
Neither material is correct in the abstract, and the right answer is usually decided by the building rather than by preference. A low-slope section rules out standard shingle entirely and points at a membrane or foam system instead, which is covered in the companion guide to flat and solar-ready roofs in Scottsdale.
Structure matters on the way in. Any change of covering that alters the load on the roof is a question for the building rather than a preference, and it needs confirming against the structure before it becomes a plan.
Community rules may narrow the field before anything technical does. Colour and material restrictions are set in a community’s recorded documents rather than by any general standard, so they are worth reading before a product is chosen rather than after.
The roof’s shape matters as much as the house’s age. A simple gable suits almost anything, while a roof with many hips, valleys, dormers and penetrations concentrates the detailing work, and detailing is exactly where metal needs skill and where shingle needs flashings that will outlast the shingles around them. A complicated roof narrows the sensible options and widens the gap between a good installation and an adequate one.
What sits on the roof is the last constraint. Air conditioning equipment, solar mounts, satellite fixings and ducting all have to be worked around and re-sealed, and each is a penetration that will be tested every monsoon. Where a roof carries a lot of equipment, the quality of the detailing around it matters more than the material above it.
Where to start
If your roof is shingle and you are seeing granules in the gutters or edges beginning to lift, start with those two articles, because between them they tell you where in its life the roof actually is rather than how it looks. If a storm has just passed, start with wind damage instead.
If you are weighing metal, start with how it behaves in this heat and with the cost-per-year question rather than with the install price, since that is where the real difference sits. How a metal roof behaves in Scottsdale heat is the place to begin.
Keep the paperwork from any work you have done. Arizona law allows a complaint to be filed with the Registrar of Contractors within two years after a project is completed (Arizona Revised Statutes 32-1162), which is a good reason to document a roof as it happens.
One safety point throughout. Assessing any of this properly means being on the roof, and the City of Scottsdale’s own homeowner guide says roof work can be dangerous and lethal for the inexperienced. If you would rather have someone look at it, Residential Roofing Scottsdale works across Scottsdale and the surrounding Valley. Call (480) 919-1173.
Frequently asked questions
These are the questions homeowners in this area ask most often when the roof on the house turns out not to be tile, which is more often than the city’s reputation suggests. Each answer is kept short deliberately, with a link to the detailed article where one exists.
Which lasts longer in Arizona, metal or shingle?
Metal generally outlasts asphalt shingle in this climate, because ultraviolet light consumes asphalt from the surface while a coated metal panel resists it. The qualifier is that metal fails at its fasteners, sealants and flashings instead, so it needs those attended to rather than being left alone.
Are metal roofs good in Arizona heat?
They perform well against ultraviolet exposure, which is the main ageing force here, and a reflective finish reduces the heat reaching the structure below. The trade is thermal movement: metal expands and contracts measurably every day, and that movement works at every fixing over time.
Can a metal roof go over an existing shingle roof?
Sometimes, and it saves tear-off and disposal. Whether it is permitted and appropriate depends on the condition of what is underneath and on the current code. Confirm your specific job with Scottsdale’s permit services rather than relying on a general answer.
What does granule loss on shingles mean?
Granules are the layer that shields the asphalt from sunlight, so losing them exposes the material underneath. Some loss is normal, particularly on a new roof. Steady accumulation in gutters on an older roof is a sign the shingles are being consumed.
Are architectural shingles worth the extra over 3-tab?
They are heavier, thicker and built from bonded layers, which generally makes them more wind-resistant, and wind is the dominant local hazard. Whether the difference justifies the cost depends on exposure and how long you intend to keep the house.
Do metal roofs make rain louder inside the house?
Not in the way people expect. A metal roof fitted over a solid deck with insulation beneath sounds very different from metal fixed to open framing on a shed, which is where the reputation comes from. The construction beneath the panel decides it.
