Do metal roofs attract lightning, in short
Do metal roofs attract lightning? No. Lightning does not seek out metal. Where it strikes is decided mainly by height, isolation and shape, not by roofing material, so a metal roof is no more likely to be struck than a tile or shingle roof on the house next door.
What metal changes is what happens if a strike does occur. Metal conducts electricity and does not burn, so it spreads the energy rather than igniting. That makes the outcome of a strike different, not more likely.
This article explains why the myth persists, what actually decides where lightning strikes, what happens when lightning hits a metal roof, and what to think about if lightning is a concern for your house. It is general information rather than electrical advice.
The reason people believe the myth
The belief is understandable. Metal conducts electricity, lightning is electricity, and the lightning rods on tall buildings are metal. It seems to follow that a large metal surface on a roof would draw strikes towards it. The logic is intuitive, but it gets the cause and effect backwards.
A lightning rod does not pull lightning from the sky. It sits at a high point that would be struck anyway, and provides a safe path to ground when that happens. The rod’s position, at the top of the structure, is what matters. Its material decides only what happens next.
The same is true of a roof. A metal roof is not a rod, and its material does not change whether lightning chooses that house. The roof’s height and position relative to its surroundings does.
That distinction between likelihood and outcome is the whole answer to the question, and the rest of this article follows from it.
Height and isolation decide where lightning strikes
Lightning tends to strike the tallest and most isolated objects in an area, because they offer the shortest path between the storm and the ground. A tree on open ground, a tower, a hilltop or a tall building stands out in a way that a single-storey house among similar houses does not.
Shape matters too. Pointed and elevated features, such as a chimney, an antenna, a tall tree beside the house, or the highest ridge in a neighbourhood, are more exposed than a broad, low roof surface.
The material of the roof is a minor factor by comparison. A house on a ridge with tall trees nearby is more exposed than a house in a valley, whatever either roof is made of.
So if lightning is a concern for a particular house, the useful questions are about its height, its surroundings and what stands above the roofline, rather than whether the roof is metal.
Lightning is a real monsoon hazard here
Lightning is not a theoretical concern in this area. The National Weather Service office in Phoenix defines the monsoon season as June 15 through September 30 and names frequent lightning among its hazards, alongside damaging winds, torrential rainfall and dust storms (NWS Phoenix).
The NOAA Storm Events Database records 19 lightning reports in Maricopa County between 2016 and 2025 (NOAA NCEI). That figure counts reported damaging or notable events rather than every strike, and reporting is denser where more people live, so it understates how often lightning actually occurs.
What it does show is that lightning damage to property is a recorded, recurring event locally, which is why the question deserves a straight answer rather than a dismissal.
It also shows that wind is far more often the cause of roof damage here, with 659 thunderstorm wind reports in the same database over the same period.
A strike on a metal roof spreads rather than burns
If lightning does strike a metal roof, the metal conducts the current across its surface and onwards, rather than concentrating it at the point of impact. That spreads the energy out. Because metal does not burn, the roof itself does not catch fire the way combustible roofing materials can.
That is the main reason metal is sometimes described as performing well in a strike. The roof is not a fuel, and it does not hold heat at one point long enough to ignite the deck beneath in the way a strike on a combustible surface can.
The current still has to go somewhere. It follows whatever conductive path leads towards the ground, which can include wiring, plumbing and other metal in the building. Damage from a strike often happens inside, to electrical systems and appliances, whatever the roof is made of.
That is why protection against lightning is an electrical question rather than a roofing one.
Lightning protection is specialist work
A lightning protection system is a designed set of air terminals, conductors and grounding that gives a strike a controlled path to earth. It is not part of a roof, and installing one is specialist work for a lightning protection installer working with an electrician. We do not design or install them.
A metal roof does not need a lightning protection system because it is metal. A house might benefit from one because of its height, its exposure, or what it contains, and that is the same decision whether the roof is metal, tile or shingle.
Surge protection for electrical systems inside the house is a separate measure again, and is a question for a licensed electrician. It addresses the damage that most often follows a nearby strike: current travelling through wiring into appliances and electronics.
If lightning is a real concern, those are the specialists to consult, and their advice does not depend on the roof material.
Trees, antennas and equipment matter more than the roof
The features that raise a house’s exposure are usually the ones standing above or beside the roof. A tall tree next to the house, a mast or antenna, a chimney, or equipment mounted high on the roof all stand out from the roof surface, and they are more likely to be the point a strike reaches.
That has practical consequences whatever the roof is made of. A strike on a tree beside a house can still send current into the building or drop branches onto the roof. Equipment on the roof, such as satellite dishes or solar arrays, adds conductive paths and penetrations that need proper connection and sealing.
None of these is a reason to avoid a metal roof. They are reasons to look at the whole property when lightning is a concern, rather than focusing on one material.
A lightning protection specialist assessing a house will look at exactly these features first, because they decide where a strike is likely to land.
Metal roofs during a storm, from inside
People also worry about being inside a metal-roofed house during a lightning storm. The general safety advice is the same for any house: stay indoors, away from windows and doors, and avoid using corded electrical equipment and plumbing during the storm.
A metal roof does not make the inside of a house more dangerous. The structure, its wiring and plumbing, and its height relative to surroundings matter far more than the roofing material.
Noise is the more noticeable difference. Rain and hail on a metal roof can be louder than on tile or shingle, depending on how the roof is built, and that is often what makes a storm feel more intense under metal. That is covered in rain noise on a metal roof.
Thunder is, of course, the same whatever is overhead.
Other monsoon risks matter more for a metal roof
For a metal roof here, wind is the storm hazard that deserves most attention. The City of Scottsdale homeowner guide names wind as the most damaging element in the southwestern desert, and metal roofs are most vulnerable at their edges, ridges and trims, where uplift is strongest.
Hail is the second. The NOAA Storm Events Database records 98 hail reports in Maricopa County between 2016 and 2025 (NOAA NCEI). Hail can dent metal panels, which may be cosmetic or may damage the finish and expose the metal beneath.
Heat is the background to both. At the Scottsdale Municipal Airport weather station, NOAA’s normals average about 93 days a year at or above 100 degrees (NOAA NCEI), and daily thermal movement is what loosens the fixings that wind then tests.
How metal behaves under that heat is covered in how a metal roof behaves in Scottsdale heat.
Deciding on metal with the facts
If lightning has been the reason to hesitate over a metal roof, it can be set aside. The roof material does not change the likelihood of a strike, and metal’s response to a strike, conducting rather than burning, is not a disadvantage.
The questions that actually decide whether metal suits a house are about heat, wind, cost over time, appearance and community rules. Those are the ones to weigh, and they are covered in the wider guide to metal and shingle roofing.
For what a metal installation involves on a particular house, see our metal roofing in Scottsdale page. For the full comparison with other materials, see the Scottsdale metal and shingle guide.
If lightning remains a concern for your particular property, talk to a lightning protection specialist or electrician about the house rather than the roof.
Where to start
If you are weighing metal and lightning is the worry, look at the house’s position instead: its height, what stands near it, and what rises above the roofline. Those decide its exposure. Then judge metal on the factors that really separate it from other roofs.
If you already have a metal roof and it has been through a strike, have the electrical systems checked first, and then have the roof looked at for any damage to the finish or fixings at the strike point.
One safety point. Never go onto a roof during or after a storm while lightning is still in the area, and the City of Scottsdale’s homeowner guide says roof work can be dangerous and lethal for the inexperienced. If you would rather have someone look at the roof, Residential Roofing Scottsdale works across Scottsdale and the surrounding Valley. Call (480) 919-1173.
Frequently asked questions
These are the questions homeowners in this area ask most often when lightning comes up in a conversation about choosing a metal roof. Each answer is kept deliberately short, and the sections above go into more detail for anyone who wants the full explanation before deciding.
Do metal roofs attract lightning?
No. Lightning strikes mainly according to height, isolation and shape, not roofing material. A metal roof on a house is no more likely to be struck than another roof on a similar house in the same position.
Is a metal roof safe in a lightning storm?
Yes. Metal conducts current and does not burn, so a strike spreads across it rather than igniting it. The usual safety advice for any house during a storm still applies: stay indoors and away from windows and corded equipment.
What happens if lightning hits a metal roof?
The metal conducts the current away from the point of impact, and because it is not combustible the roof itself does not catch fire. The current then follows conductive paths, so wiring and appliances inside can still be affected.
Does a metal roof need to be grounded?
A metal roof does not need a lightning protection system because it is metal. Whether a house needs one depends on its height and exposure, and that is a question for a lightning protection specialist or electrician.
Are metal roofs louder in a thunderstorm?
Rain and hail can be louder on metal than on tile or shingle, depending on how the roof is built. A metal roof over a solid deck with insulation beneath is much quieter than metal over open framing.
Is lightning common in Scottsdale?
The National Weather Service names frequent lightning as a monsoon hazard, and NOAA’s Storm Events Database records 19 lightning reports in Maricopa County from 2016 to 2025. That counts reported events, not every strike.
